Microstructure And Mechanical Properties Of Electroplated Cu Films For Damascene Ulsi Metallization

Abstract

ABSTRACTCopper has been deposited for filling sub-0.5 μm trenches by using electroplating. Electroplating with pulse plating conditions provides the high deposition rate (0.5–1 μm/min) and defect-free filling the 0.25 μm trenches and vias of high aspect ratio (>4:1). Enhanced copper electroplating at the trench bottom has been achieved. The median grain size of electroplated copper was measured to be about 1 jim and the lognormal standard deviation is about 0.4 μm. Strong <111> texture was observed in electroplated Cu film. Low stress of electroplated Cu films and excellent adhesion of plated Cu to sputtered Cu seed were observed.