Comparison of CoW/SiO2 and CoB/SiO2 Interconnects from the Perspective of Electrical and Reliability Characteristics

Abstract

As the feature size of integrated circuits has been scaled down to 10 nm, the rapid increase in the electrical resistance of copper (Cu) metallization has become a critical issue. To alleviate the resistance increases of Cu lines, co-sputtered CoW and CoB alloying metals were investigated as conductors and barriers in this study. Annealing CoM (M = W or B)/SiO2/p-Si structures reduced the resistivity of CoM alloys, removed sputtering-deposition-induced damage, and promoted adhesion. Additionally, both annealed CoW/SiO2 or CoB/SiO2 structures displayed a negligible Vfb shift from capacitance-voltage measurements under electrical stress, revealing an effective barrier capacity, which is attributed to the formation of MOx layers at the CoM/SiO2 interface. Based on the thermodynamics, the B2O3 layer tends to form more easily than the WOx layer. Hence, the annealed CoB/SiO2/p-Si MIS capacitor had a higher capacitance and a larger breakdown strength did than the annealed CoW/SiO2/p-Si MIS capacitor.