Affiliation:
1. Universiti Teknikal Malaysia Melaka
2. Universiti Tenaga Nasional
3. Universiti Kebangsaan Malaysia
Abstract
In this research, orthogonal array of L27 in Taguchi Method was used to optimize the process parameters (control factors) variation in 45nm n-channel device with considering the interaction effect. The signal-to-noise (S/N) ratio and analysis of variance (ANOVA) are employed to study the performance characteristics of the device. There are only five process parameters (control factors) were varied for 3 levels to performed 27 experiments. Whereas, the two noise factors were varied for 2 levels to get four readings of Vth for every row of experiment. In this study, nominal-the-best characteristic was used in an effort to minimize the variance of Vth. The results show that the Vth values have least variance and percent different from the target value (0.287V) for this device is 1.42% (0.293V). This value is closer with International Technology Roadmap for Semiconductor (ITRS) prediction.
Publisher
Trans Tech Publications, Ltd.
Reference10 articles.
1. Ramakrishnan, H., S. Shedabale, G. Russell, and A. Yakovlev, Analysing the effect of process variation to reduce parametric yield loss, IEEE ICICDT (2008) 171–175.
2. M. S. Phadke, Quality Engineering Using Robust Design. Pearson Education, Inc. and Dorling Kindersley Publishing, Inc., (1998).
3. Atil, Hulya and Unver, Yakut, A Different Approach of Experimental Design: Taguchi Method, Pakistan J. Biological Sciences, 3(9): (2000) 1538-1540.
4. Ismail A.R., et. al, The Optimization of Environmental Factors at manual Assembly Workstation by Using Taguchi Method, J. Applied Sciences, 10(13): (2010) 1293-1299.
5. Arenas, D. Nava, et. al., Optimization of Germination Conditions of Blue Corn by Taguchi Orthogonal Array Methodology, Asian J. Plant Sciences, 7(7): (2008) 682-686.
Cited by
4 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献