Author:
Smith L. L.,Bremser M. D.,Carlson E. P.,Weeks T. W.,Huang Y.,Kim M. J.,Carpenter R.W.,Davis R. F.
Abstract
ABSTRACTOhmic contact strategies for n- and p-type GaN have been investigated electrically, chemically, and microstructurally using transmission line measurements, high-resolution EELS and cross-sectional TEM, respectively. The contributions to contact performance from work function differences, carrier concentrations, annealing treatments, and interface metallurgy have been examined. The contact materials of Ti, TiN, Au, and Au/Mg were deposited via electron beam evaporation; Al was deposited via thermal evaporation. As-deposited Al and TiN contacts to highly doped n-GaN were ohmic, with room-temperature specific contact resistivities of 8.6×10−5 Ω cm2 and 2.5×10−5 Ωcm2 respectively. The Ti contacts developed low-resistivity ohmic behavior as a result of annealing; TiN contacts also improved with further heat treatment. For p-GaN, Au became ohmic with annealing, while Au/Mg contacts were ohmic in the as-deposited condition. The performance, structure, and composition of different contact schemes varied widely from system to system. An integrated analysis of the results of this study is presented below and coupled with a discussion of the most appropriate contact systems for both n- and p-type GaN.
Publisher
Springer Science and Business Media LLC
Cited by
19 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献