Design, Fabrication, and Performance Evaluation of Portable and Large-Area Blackbody System

Abstract

In this study, a portable and large-area blackbody system was developed following a series of processes including design, computational analysis, fabrication, and experimental analysis and evaluation. The blackbody system was designed to be lightweight (5 kg), and its temperature could exceed the ambient temperature by up to 15 °C under operation. A carbon-fiber-based heat source was used to achieve a uniform temperature distribution. A heat shield fabricated from an insulation material was embedded at the opposite side of the heating element to minimize heat loss. A prototype of the blackbody system was fabricated based on the design and transient coupled electro-thermal simulation results. The operation performance of this system, such as the thermal response, signal transfer function, and noise equivalent temperature difference, was evaluated by employing an infrared imaging system. In addition, emissivity was measured during operation. The results of this study show that the developed portable and large-area blackbody system can be expected to serve as a reliable reference source for the calibration of aerial infrared images for the application of aerial infrared techniques to remote sensing.