Electrodeposition of lead‐free solder alloys
Author:
Goh Yingxin,Haseeb A.S.M.A.,Faizul Mohd Sabri Mohd
Abstract
PurposeThe purpose of this paper is to enhance the understanding on the electrodeposition of various lead (Pb)‐free solder alloys, so that new studies can be carried out to solve processing issues.Design/methodology/approachThe paper reviews the available reports on the electrodeposition of tin (Sn)‐based solder systems and identifies the challenges in this area.FindingsCompositional control remains a major challenge in this area, where the achievement of desired composition for binary and ternary alloys is subjected to uncertainties. The use of chelating agents in the bath and optimization of parameters can assist the achievement of near‐desired alloy composition. Acidic plating baths are preferred due to their compatibility with photoresists but oxidation of stannous ions causes poor bath stability. Antioxidants, reducing agents and low oxygen overpotential anodes can suppress the oxidation rate and increase the lifespan of plating baths. Apart from chelating agents and antioxidants, various categories of additives can be added to improve quality of deposits. Surfactants, grain refiners and brighteners are routinely used to obtain smooth, fine‐grained and bright deposits with good thermo‐mechanical properties.Originality/valueThe paper provides information on the key issues in electrodeposition of Pb‐free solder alloys. Possible measures to alleviate the issues are suggested so that the electrodeposition technique can be established for mass production of a wider range of solder alloys.
Subject
Electrical and Electronic Engineering,Condensed Matter Physics,General Materials Science,Electrical and Electronic Engineering,Condensed Matter Physics,General Materials Science
Reference77 articles.
1. Anderegg, G., Arnaud‐Neu, F., Delgado, R., Felcman, J. and Popov, K. (2005), “Critical evaluation of stability constants of metal complexes of complexones for biomedical and environmental applications”, Pure and Applied Chemistry, Vol. 77, pp. 1445‐95. 2. Arai, S. and Kaneko, N. (1997), “Electrodeposition of Sn‐Ag‐Cu alloys”, Denki Kagaku, Vol. 65, pp. 1102‐6. 3. Arici, M., Nazira, H. and Aksu, M.L. (2011), “Investigation of Sn‐Zn electrodeposition from acidic bath on EQCM”, Journal of Alloys and Compounds, Vol. 509, pp. 1534‐7. 4. Bi, J., Jiang, J., Hu, A., Li, M., Mao, D. and Suga, T. (2009), “Fine pitch and high density Sn bump fabrication”, International Conference on Electronic Packaging Technology and High Density Packaging (ICEPT‐HDP), pp. 874‐7. 5. Bicelli, L.P., Bozzini, B., Mele, C. and D'Urzo, L. (2008), “A review of nanostructural aspects of metal electrodeposition”, International Journal of Electrochemical Science, Vol. 3, pp. 356‐408.
Cited by
13 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献
|
|