Affiliation:
1. Department of Postharvest Management, College of Agriculture and Veterinary Medicine , Jimma University , Ethiopia
Abstract
Abstract
The objective of the present study was to standardise the duration and temperatures of the conventional oven drying methods for best physical and sensory characteristics of dried tomato. The experiment consisted of two factor factorial design (3*2) with three levels of drying temperature (70°C, 80°C and 90°C) and two levels of drying duration (7 and 8 hours) with three replications. An improved and high yielding variety (Cochoro) of tomato released in 2007 for processing and widely grown in Ziwai (Maki), Ethiopia was used. Prior to drying, individual tomato fruits were washed and sliced into uniform thickness (8mm); then, the slices were placed on to the drying trays in a single layer to facilitate uniform drying in hot air oven set at predetermined temperatures per the respective treatments. Data were collected on different physical and sensory attributes and analysed using SAS software (version 9.2). The results showed that titratable acidity, total soluble solids and water absorption capacity were significantly (p≤0.001) increased due to the interaction of degree of temperature and duration of oven drying. In contrast, pH and water activity decreased as the drying temperature and duration increased. Drying at 70°C for 7 hours produced dried tomatoes with the highest sensorial acceptability and physical attributes while higher temperatures (80, 90°C) and longer duration (9 hours) significantly detract the quality of dried tomato. Hence, it is possible to add value and preserve tomatoes through oven drying at the right temperature and optimum duration.
Subject
Industrial and Manufacturing Engineering,Food Science
Reference58 articles.
1. 1. Abdalla, S. A. Sulieman, A.M.E. & Salih, Z. A. (2014). Chemical and microbiological characteristics of two tomato cultivars dried using shade and oven methods. J. Food Nut. Disorders. 3(3), 1-5. DOI: http://dx.doi.org/10.4172/2324-9323.1000142.
2. 2. Adedeji, O., Taiwo, K. A., Akanbi, C. T. & Ajani, R. (2006). Physicochemical properties of four tomato cultivars grown in Nigeria. J of Food Proc. Pre. 30(1), 79-86. DOI: 10.1111/j.1745-4549.2005.00049.x.
3. 3. Akanbi, C.T., Adeyemi, R.S. & Ojo, A. (2006). Drying characteristics and sorption isotherm of tomato slices, J. of Food Eng. 73 (2), 157–163. DOI: http://dx.doi.org/10.1016/j.jfoodeng.2005.01.015.
4. 4. Ahmadzadeh, G. & Mehdi G. D. (2010). Studies on physiochemical properties of tomato powder as affected by different dehydration methods and pre-treatments. World Aca. Sci., Eng. and Tech. 4(1), 09-21.
5. 5. Andritsos, N., Dalampakis, P., & Kolios, N. (2003). Use of geothermal energy for tomato energy. GMC Bulletin (March), 9–13.
Cited by
31 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献