On the Constitutive Response of 63/37 Sn/Pb Eutectic Solder-Reference-Cited by-同舟云学术

On the Constitutive Response of 63/37 Sn/Pb Eutectic Solder

Published:1996-01-01 Issue:1 Volume:118 Page:1-11
ISSN:0094-4289
Container-title:Journal of Engineering Materials and Technology
language:en
Short-container-title:

Author:

Skipor A. F.¹,Harren S. V.²,Botsis J.²

Affiliation:

1. Corporate Manufacturing Research Center, MOTOROLA, 1301 E. Algonquin Rd., Schaumburg, IL 60196

2. Dept. of Civil and Materials Engineering, The University of Illinois at Chicago, 842 W. Taylor St., Chicago, IL 60607

Abstract

The constitutive response of 63/37 Sn/Pb eutectic solder is studied under uniaxial tension. Stress-strain tests were performed under a wide range of applied strain rate, and creep tests were performed at several levels of applied load. Temperature dependence was ascertained by running the stress-strain and creep tests at various temperatures. With the goal of providing a constitutive description of the eutectic suitable for use in electronics packaging engineering finite element analyses, the material parameters of the phenomenological viscoplasticity model of Bodner and Partom were fit to these experiments as functions of temperature. The experiments described herein also yield important information concerning how many microstructural units must be present in a sample in order for repeatable, isotropic response to be obtained.

Publisher

ASME International

Subject

Mechanical Engineering,Mechanics of Materials,Condensed Matter Physics,General Materials Science

Link

http://asmedigitalcollection.asme.org/materialstechnology/article-pdf/118/1/1/5716970/1_1.pdf

Reference37 articles.

1. Adams, P. J., 1981, “Thermal Fatigue of Solder Joints in Micro-Electronic Devices,” M. S. thesis, Massachusetts Institute of Technology.

2. Arrowood, R., Mukherjee, A., and Jones, W. B., 1991, “Hot Deformation of Two-Phase Mixtures,” Solder Mechanics: A State of the Art Assessment D. R. Frear, W. B. Jones and K. R. Kinsman, eds. The Minerals, Metals & Materials Society, Warrendale, PA.

3. Beek, J. M., 1986, “A Comparison of Current Models for Nonlinear Rate-Dependent Material Behavior of Crystalline Solids,” M.S. thesis, Texas A&M University.

4. Bodner S. R. , PartomI., and PartomY., 1979, “Uniaxial Cyclic Loading of Elastic-Viscoplastic Materials,” ASME Journal of Applied Mechanics, Vol. 46, p. 805805.

5. Bodner S. R. , and PartomY., 1972, “A Large Deformation Elastic-Viscoplastic Analysis of a Thick-Walled Spherical Shell,” ASME Journal of Applied Mechanics, Vol. 39, p. 751751.

Cited by 61 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Thermo‐mechanical behavior of ball grid packages with different solder ball grid patterns investigated through moiré interferometry;Materialwissenschaft und Werkstofftechnik;2024-05

2. Numerical Evaluation of Sintered Silver Die Attachments Based on Different Material Parameters and Creep Constitutive Models;IEEE Transactions on Components, Packaging and Manufacturing Technology;2023-08

3. Nonlinear finite element simulations on the mechanical response of the isothermally aged lead-free solders;Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications;2023-06-02

4. A review on nanodispersed lead-free solders in electronics: synthesis, microstructure and intermetallic growth characteristics;Journal of Materials Science;2022-05

5. The comparison of Qian-Liu model and Anand model for uniaxial tensile test of SAC305;2019 20th International Conference on Electronic Packaging Technology(ICEPT);2019-08