Author:
Warcholinski B.,Gilewicz A.,Kuprin A.S.
Abstract
The AlCrN coatings were formed using cathodic arc evaporation at constant nitrogen pressure and arc current ranged from 50 to 120 A. Scanning electron microscopy, energy dispersive analysis, X-ray diffractometry, nanoindentation, adhesion tests and friction tests were used to investigate the effect of arc current on surface morphology, composition, structure, and mechanical and tribological properties of coatings. It was found that all coatings present cubic AlCrN with Al/(Al+Cr) ratio independent on arc current. Increase in the arc current results in increase in lattice parameter, crystallite size as well as deposition rate and coating surface roughness. A decrease in hardness with a simultaneous increase in Young's modulus is also observed. The adhesion of the coatings shows a non-linear character with the maximum (108 N) for the coating formed at an arc current of 80 A, which may explain the best wear resistance – the lowest wear rate 1.4·10-7 mm3/Nm.
Publisher
Problems of Atomic Science and Technology
Subject
Music,Ecology, Evolution, Behavior and Systematics,History,General Medicine,Ophthalmology,General Medicine,Pharmaceutical Science,Political Science and International Relations,Sociology and Political Science,Political Science and International Relations,Sociology and Political Science,Sociology and Political Science,Plant Science
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献