Analysis of influence factors of rail corrugation in small radius curve track
-
Published:2021-01-27
Issue:1
Volume:12
Page:31-40
-
ISSN:2191-916X
-
Container-title:Mechanical Sciences
-
language:en
-
Short-container-title:Mech. Sci.
Author:
Wang Zhiqiang,Lei Zhenyu
Abstract
Abstract. In order to effectively prevent and control the generation and
development of rail corrugation, according to the actual line condition of the small radius curve section, the vehicle (with flexible wheel sets)–track space coupled model was established by using the multi-body dynamic software
UM (Universal Mechanism), which could consider the coupled relationship in three directions of space, and the dynamic analysis for the corrugation section was carried out by
using the model. Then, based on the theory of friction self-excited
vibration, the three-dimensional model of a wheel–rail system was established by using the finite-element software ABAQUS, and the complex eigenvalue analysis of influence factors of rail corrugation was conducted based on
wheel–rail contact parameters obtained by dynamic calculation. Through the stability analysis of the wheel–rail system with different fastener vertical and lateral stiffnesses, friction coefficients, and superelevation states, we find that properly increasing the fastener vertical and lateral
stiffnesses, controlling the wheel–rail friction coefficient below 0.4, and keeping the balanced superelevation state of the track structure can effectively reduce the occurrence possibility of unstable vibration of the wheel–rail system, thus inhibiting the generation and development of rail corrugation. The excess superelevation state of the track structure results in the unstable friction self-excited vibration of the wheel–rail system at the inner wheel–inner rail, while the deficient superelevation state results in the unstable friction self-excited vibration of the wheel–rail system at the outer wheel–outer rail, which shows that the superelevation state of the track structure directly affects the formation of rail corrugation and determines
the development order of corrugation of inner and outer rails. This
conclusion can well explain the cause of corrugation appearing on only one side rail.
Funder
National Outstanding Youth Science Fund Project of National Natural Science Foundation of China
Publisher
Copernicus GmbH
Subject
Industrial and Manufacturing Engineering,Fluid Flow and Transfer Processes,Mechanical Engineering,Mechanics of Materials,Civil and Structural Engineering,Control and Systems Engineering
Reference31 articles.
1. Chen, G. X., Zhou, Z. R., Ouyang, H., Jin, X. S., Zhu, M. H., and Liu, Q.
Y.: A finite element study on rail corrugation based on saturated creep
force-induced self-excited vibration of a wheelset–track system, J.
Sound Vib., 329, 4643–4655, https://doi.org/10.1016/j.jsv.2010.05.011, 2010. 2. Chen, G. X., Zhang, S., Wu, B. W., Zhao, X. N., Wen, Z. F., Ouyang, H., and
Zhu, M. H.: Field measurement and model prediction of rail corrugation,
P. I. Mech. Eng. F-J.
Rai., 234, 381–392,
https://doi.org/10.1177/0954409719877318, 2020. 3. Cui, X. L., Chen, G. X., Yang, H. G., Zhang, Q., Ouyang, H., and Zhu, M. H.:
Study on rail corrugation of a metro tangential track with Cologne-egg type
fasteners, Vehicle Syst. Dyn., 54, 353–369,
https://doi.org/10.1080/00423114.2015.1137955, 2016. 4. Cui, X. L., Chen, G. X., and Yang, H. G.: Influence of wheelset structure
and fastener stiffness on rail corrugation, Journal of Southwest Jiaotong
University, 52, 112–117, https://doi.org/10.3969/j.issn.0258-2724.2017.01.016, 2017. 5. Cui, X. L., Yan, S., and Chen, G. X.: Field measurement and numerical
simulation for rail corrugation in sector of fixed dual short sleeper,
Journal of Vibration and Shock, 37, 171–176,
https://doi.org/10.13465/j.cnki.jvs.2018.13.027, 2018.
Cited by
9 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献
|
|