Analysis of methane hazard in longwall working equipped with a powered longwall complex

Abstract

Most of currently exploited hard coal seams has a very high degree of methane saturation. Consequently, the mining process of such deposits generates substantial amounts of methane. This in turn increases the risk of fire and/or explosion of this gas. Methane hazard is currently one of the most dangerous threats occurring in the process of underground mining exploitation. In particular, this applies to longwall excavations where the rock mass mining process generates the highest level of this gas. Commonly used high-performance longwall complexes cause an increase in the amount of coal output, which also causes an increase in the amount of methane released. In order to prevent hazardous concentrations, appropriate ventilation systems and atmosphere monitoring in mining excavations are used. The paper discusses currently used methods designed to limit risks caused by methane such as methane drainage. The paper presents an example of the use of an innovative method of analysing methane risk status and measures aimed at minimizing it. The developed method is based on air parameters in the actual mining area which were then used to create a method of ventilation for such excavations. The method combines advanced model analysis and experience of mine employees and integrates academic and practical knowledge. The main objective of the activities presented in the article was to improve the safety of mining operation