Dynamic Analysis for the Hydraulic Leg Power of a Powered Roof Support

Abstract

This paper presents the results of a study conducted to determine the dynamic power of a hydraulic leg. The hydraulic leg is the basic element that maintains the position of a powered roof support. It is located in the structure between the canopy and the floor base. The analysis assumes that its power must be greater than the energy of the impact of the rock mass. The energy of the rock mass is generated by tremors caused mainly by mining exploitation. The mining and geological structure of the rocks surrounding the longwall complex also have an influence on this energy generation. For this purpose, stationary tests of the powered roof support were carried out. The analysis refers to the space under the piston of the leg, which is filled with fluid at a given pressure. The bench test involved spreading the leg in the test station under a specified pressure. It was assumed that the acquisition of dynamic power would be at the point of pressure and increase in the space under the piston of the leg under forced loading. Based on the experimental studies carried out, an assessment was made with the assumptions of the methodology adopted. The results of the theoretical analysis showed consistency with the experimental results.