Development of the experimental stand for investigation of heating and drying phenomena in the porous building materials with one surface of the sample exposed to the flowing air

Abstract

The paper presents development of the experimental stand for investigation of heating and drying phenomena in the porous building materials with one surface of the sample exposed to the flowing air. Moreover, results of preliminary measurements which verify the range of operating conditions achieved by the stand are shown. These conditions were assumed in the following range: 15℃-60℃, 10-90% and 0.1-10 m/s for temperature, relative humidity and velocity of the flowing air, respectively. In order to control the parameters of air used for heating and drying of porous materials, a closed-loop concept of the stand was proposed and equipped with several elements, i.e., the cooler (vapour condenser), fan with variable rotational speed, humidifier and heater. Furthermore, two parallel measurement ducts which allow to obtain two air streams with identical parameters were proposed. This enables two measurements at one time as well as faster verification of the repeatability of the performed measurements. The temperature measurements at the top surface and inside the sample are carried out applying the IR thermography and several K-type thermocouples, respectively, while overall moisture amount and the moisture content distribution in the specimen are found using tensometric force and electrical resistance meters, respectively.