Unique Size-Dependent Challenges for BEOL Cleans in the Patterning of Sub-20 nm Features

Abstract

BEOL Cleans has been and continues to be one of the most mysterious black boxes of semiconductor manufacturing. It has the unenviable task of removing post-plasma processing polymer residues, being compatible with ultra low-k dielectric materials that continue to scale k-value at the expense of material strength, and ensuring that any formulation that accomplishes the above objectives is also compatible with Cu and all other metals on the wafer used for liners or caps. In order to meet the performance requirements of next generation devices, Moore's law mandates continued scaling of dimensions with the additional challenges of size-dependent complexities for BEOL cleans development. Patterning of sub-20 nm features on thin ILD stacks suffers from the problems of etch-induced line undulation [1, 2] and cleans-induced pattern collapse [3]. High aspect ratio's, non-uniform drying, surface tension and low material strength have all been implicated as the root cause for pattern collapse during cleans [4]. Classical equations used to describe pattern collapse for resist lines that rely on 2D beam theory and finite element modeling [5] are not as applicable to patterned low-k dielectrics because material changes such as sidewall polymer residues, lowering of Young's modulus and changing pattern densities present different solid surfaces with widely varying wettability and diffusivity parameters [6, .