Affiliation:
1. Technical University in Košice
Abstract
The basic hypothesis of this article focuses on the study changes in mechanical properties of stainless steels ELC X01Cr18Ni10Ti under surface finish when drilling. The problem of drilling holes with diameter D=3 to 10 mm resides in the fact that 30 to 40% of these holes do not comply with prescribed requested requirements1. This article presents the results of experiments focusing on the study of the damage process in helical drills with diameter d=6.0 mm when drilling into austenitic stainless steel ELC X01Cr18Ni10Ti. This study also includes an analysis of accompanying phenomena in the cutting zone by measuring some selected parameters.
Publisher
Trans Tech Publications, Ltd.
Reference6 articles.
1. J. JURKO-A. PANDA-M. GAJDOŠ: Accompanying phenomena in the cutting zone machinability during turning of stainless steels. International Journal Machining and Machinability of Materials, INDERSCENCE Publisher, Vol. 5, No. 4, 2009, 383-400 p. ISSN 1748-5711, (2009).
2. T. ZABOROWSKI: Technologia kszaltowania warstwy wierzchniej. Monografia, Gorzow Wlkp., 2011, p.99, ISBN 978-83-932166-8-0.
3. M. NESLUŠAN, I. MRKVICA, R. ČEP, D. KOZAK, R. KONDERLA: Deformation After Heat Treatment and Their Influence on Cutting Process. Tehnički vjesnik/Technical Gazette, 2011, Vol. 18, No. 4, pp.601-608 . ISSN 1330-3651.
4. J. JURKO : Verification of surface finish as an indicator of machinability in turning steel X6Cr16Ni10MoTiN, Advanced Materials Research. Vol. 291-294, 2987-2990 p., ISSN 1022-6680, (2011).
5. J. JURKO : The use of TiAlN coated carbide tool when finish drilling of stainless steel X4Cr17ni8TiN. Applied Mechanics and Materials, Vol. 39, 369-374 p., ISSN 1660-9336, (2010).
Cited by
6 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献