Serpentine spring design technique for high sensitivity MEMS capacitive accelerometer fabricated by gold multi-layer metal technology

Abstract

Abstract This paper describes a design technique for serpentine spring with the edge span beam L/2. In order to improve design accuracy, we investigate the key structure parameters influenced by the fabrication process for MEMS device, comparing finite element analysis (FEA) and analytical models. It is found that the Fedder model as the analytical model is suitable for the spring constant characteristics of FEA with the edge span beam L/2. Further, the thickness and width are found to be the key structure parameters and the dominant factor of variation regarding the serpentine spring. Based on the analysis, we propose a spring design technique. The experimental results show that the variation between the measured data of 4.46 N m−1 and the design value of 4.15 N m−1 was 7.5%, satisfying the target of ±10%. It is confirmed that the proposed technique can establish the serpentine spring for high sensitivity gold proof-mass MEMS accelerometers.