Investigation of drag reduction mechanism for blunt bodies with plasma spikes

Abstract

The two main problems in hypersonic vehicles are wave drag and aerodynamic heating. This work proposes a novel method for drag reduction by combining spikes with the plasma synthetic jet actuator (PSJA). Numerical simulations are performed to better understand the drag reduction mechanism with an incoming flow at Mach 6. The results suggest that the flow field is affected primarily by the diffracted wave and synthetic jet. The maximum drag reduction reaches 47.7% with the plasma spike compared with the opposing jet. A better drag reduction effect is achieved when increasing the energy density of the PSJA, while the propagation velocity of the diffracted wave remains constant. A wider and faster jet is obtained with a larger PSJA orifice diameter. However, the control time of the jet shortens. A mode conversion occurs when the orifice diameter is 1 mm. Furthermore, the maximum drag reduction rate increases from 37.6% to 49.0% when the length diameter ratio (L/D) increases from 0.5 to 1.5. The effect of spike length on drag reduction decreases gradually at greater lengths.