Annealing of Ion Implantation Damage in SiC Using a Graphite Mask

Abstract

ABSTRACTFor p-type ion implanted SiC, temperatures in excess of 1600 °C are required to activate the dopant atoms and to reduce the crystal damage inherent in the implantation process. At these high temperatures, however, macrosteps (periodic welts) develop on the SiC surface. In this work, we investigate the use of a graphite mask as an anneal cap to eliminate the formation of macrosteps. N-type 4H- and 6H-SiC epilayers, both ion implanted with low energy (keV) Boron (B) schedules at 600 °C, and 6H-SiC substrates, ion implanted with Aluminum (Al), were annealed using a Graphite mask as a cap. The anneals were done at 1660 °C for 20 and 40 minutes. Atomic force microscopy (AFM), capacitance-voltage (C-V) and secondary ion mass spectrometry (SIMS) measurements were then taken to investigate the effects of the anneal on the surface morphology and the substitutional activation of the samples. It is shown that, by using the Graphite cap for the 1660 °C anneals, neither polytype developed macrosteps for any of the dopant elements or anneal times. The substitutional activation of Boron in 6H-SiC was about 15%.