Experimental Assessment of the Acoustic Performance of Nozzles Designed for Clean Agent Fire Suppression

Abstract

Discharge through nozzles used in gas-based fire protection of data centers may generate noise that causes the performance of hard drives to decay considerably; silent nozzles are employed to limit this harmful effect. This work focuses on proposing an experimental methodology to assess the impact of sound emitted by gaseous jets by comparing various nozzles under several operating conditions, together with relating that impact to design parameters. A setup was developed and repeatability of the experiments was evaluated; standard and silent nozzles were tested regarding the discharge of inert gases and halocarbon compounds. The ability of silent nozzles to contain the emitted noise—generally below the 110 dB reference threshold—was proven effective; a relationship between Reynolds number and peak noise level is suggested to support the reported increase in noise maxima as released flow rate increases. Hard drives with lower speed were the most affected. Spectral analysis was conducted, with sound at the higher frequency range causing performance decay even if lower than the acknowledged threshold. Independence of emitted noise from the selected clean agent was also observed in terms of released volumetric flow rate, yet the denser the fluid, the lower the generated noise under the same released mass flow rate.