Ni/CeO2 Catalyst Prepared via Microimpinging Stream Reactor with High Catalytic Performance for CO2 Dry Reforming Methane

Abstract

Methane reforming with carbon dioxide (DRM) is one promising way to achieve carbon neutrality and convert methane to syngas for high-value chemical production. Catalyst development with better performance is the key to its potential large-scale industrial application due to its deactivation caused by carbon deposition and metal sintering. Hence, a Ni/CeO2 catalyst (Ni/CeO2-M) with higher CO2 conversion and better stability is prepared, supported on CeO2 precipitated via a novel microimpinging stream reactor. A series of ex-situ or in-situ characterizations, such as CO titration measurements, two-step transient surface reaction (two-step TSR), CO2 and CH4 temperature-programmed surface reaction (CO2-TPSR and CH4-TPSR), X-ray absorption fine structure (XAFS), and in-situ Raman spectroscopy study, were used to investigate its structure and mechanism. In contrast to Ni supported on commercial CeO2 (Ni/CeO2-C), the Ni/CeO2-M catalyst with stronger lattice oxygen mobility and higher oxygen storage capacity enhances its CO2 activation ability and carbon deposition. The Ni particle size of the Ni/CeO2-M catalyst decreased, and a higher oxidation state was obtained due to the strong metal–support interaction. Besides the reaction performance improvement of the Ni/CeO2-M catalyst, the novel microimpinging stream reactor could achieve catalyst continuous production with a high preparation efficiency. This work provides a novel method for the high-performance catalyst preparation for DRM reaction and its mechanism study gives a deep insight into high-performance catalyst development via bottom-up study.