Author:
Zhou Chenyang,Shen Yanxia
Abstract
Vibrations occur in the wind turbine drivetrain due to the drivetrain’s elasticity and gear clearance. Typically, the PID control method is used to suppress elastic vibration, while the method with the disturbance suppression function is used to suppress nonlinear gear clearance vibration. The purpose of this paper is to propose an equivalent PID control method based on the internal model control (IMC) for suppressing vibration caused by the wind turbine drivetrain’s elasticity and gear clearance. The equivalent PID controller can suppresses elastic vibration; the IMC controller can suppresses gear clearance vibration. First, the vibration principle of the two-mass wind turbine drivetrain with clearance is discussed. After analyzing the nonlinear characteristics of the gear clearance, the nonlinear clearance system is decomposed into a linear unit and a nonlinear bounded disturbance unit. To suppress nonlinear bounded disturbances, a disturbance suppression method based on IMC is proposed; simultaneously, an equivalent PID controller based on IMC is designed to resolve the vibration issue caused by the wind turbine drivetrain’s elasticity. The simulation experimental results show that the clearance vibration is suppressed by the original IMC method. The PID controller obtained by the IMC equivalent transformation can suppress the elastic vibration.
Funder
National Key research and development Program of China
Subject
Energy (miscellaneous),Energy Engineering and Power Technology,Renewable Energy, Sustainability and the Environment,Electrical and Electronic Engineering,Control and Optimization,Engineering (miscellaneous),Building and Construction
Reference23 articles.
1. Nonlinear torsional vibrations of a wind turbine gearbox
2. Dynamic Analysis of Wind Turbine Gearbox Components
3. Cause and suppression of mechanical resonance in PMSM servo system;Yang;Electr. Mach. Control,2012
4. Online suppression of mechanical resonance based on adapting notch filter;Yang;J. Harbin Inst. Technol.,2014
5. Vibration Control of Three-Inertia System;Zhang;Proceedings of the IECON’99. Conference Proceedings. 25th Annual Conference of the IEEE Industrial Electronics Society,1999
Cited by
6 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献