Microstructural Evolution and Mechanical Behavior of TA15 Titanium Alloy Fabricated by Selective Laser Melting: Influence of Solution Treatment and Aging

Abstract

In this study, TA15 titanium alloys were successfully prepared using selective laser melting (SLM). The results show that the microstructure of each TA15 specimen is composed of a large number of acicular α’ martensite crystals accompanied by a lot of dislocations and twin structures in the martensite due to non-equilibrium heating and cooling via SLM. After solution treatment and aging treatment, the martensite structure is successfully transformed into a typical duplex structure and an equiaxial structure. When there is an increase in the solution temperature, the size of the equiaxed primary α phase and the elongation of the specimen gradually increases, while the thickness of the layered secondary α phase and the tensile strength of the specimen decreases accordingly. After solution treatment at 1000 °C, the specimens show the best comprehensive mechanical properties, i.e., a high-temperature tensile strength of 715 MPa and a corresponding elongation of 24.5%. Subsequently, an appropriate solution–aging treatment is proposed to improve the high-temperature mechanical properties of SLMed TA15 titanium alloys in aerospace.