The microstructure and tensile properties of additively manufactured Ti–6Al–2Zr–1Mo–1V with a trimodal microstructure obtained by multiple annealing heat treatment-Reference-Cited by-同舟云学术

The microstructure and tensile properties of additively manufactured Ti–6Al–2Zr–1Mo–1V with a trimodal microstructure obtained by multiple annealing heat treatment

Published:2022-01 Issue: Volume:831 Page:142241
ISSN:0921-5093
Container-title:Materials Science and Engineering: A
language:en
Short-container-title:Materials Science and Engineering: A

Author:

Zhang Sheng^ORCID,Zhang Yuqi^ORCID,Zou Zhiyi,Shi Yusheng,Zang Yong

Publisher

Elsevier BV

Subject

Mechanical Engineering,Mechanics of Materials,Condensed Matter Physics,General Materials Science

Reference56 articles.

1. Manufacture by selective laser melting and mechanical behavior of commercially pure titanium;Attar;Mater. Sci. Eng.,2014

2. Microstructure and properties of a novel titanium alloy Ti-6Al-2V-1.5Mo-0.5Zr-0.3Si manufactured by laser additive manufacturing;Li;Mater. Sci. Eng.,2017

3. An experimental study of residual stress and direction-dependence of fatigue crack growth behaviour in as-built and stress-relieved selective-laser-melted Ti6Al4V;Syed;Mater. Sci. Eng.,2019

4. Mechanical properties and microstructural evolution of TA15 Ti alloy processed by selective laser melting before and after annealing;Jiang;Mater. Sci. Eng.,2020

5. Micromechanical behaviour of TA15 alloy cylindrical parts processed by multi-pass flow forming;Wang;Mater. Sci. Eng.,2018

Cited by 30 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Evolution of microstructure and mechanical properties of Ti65 high-temperature titanium alloy after additive manufacturing and annealing;Materials Science and Engineering: A;2024-10

2. Influence of heat treatment on microstructure and tensile properties of selective laser melting metastable Ti55531-0.5Nb alloy;Engineering Failure Analysis;2024-10

3. Influences of solution temperature on microstructures and performance of electron beam welded joints of laser powder bed fusion TC11 thin-walled samples;Materials Characterization;2024-06

4. Identification of an affordable and printable metastable β Ti alloy with outstanding deformation behaviour for use in laser powder bed fusion;Materials Science and Engineering: A;2024-06

5. Microstructure amelioration and strength-ductility improvement of WAAM-LDM hybrid additive manufacturing Ti-6Al-4V alloy by solution treatment and aging;Materials Characterization;2024-06