Experimental and Numerical Investigation on the Aerosol Micro-Jet 3D Printing of Flexible Electronic Devices

Abstract

In this study, the optimal forming parameters for printing flexible circuits using aerosol jet printing technology are explored through numerical simulation and experiments. The printhead during the deposition process is numerically simulated. By employing the controlled variable method, the process parameters such as gas flow rate, working distance, nozzle diameter, and printing speed are selected to investigate their effects on the morphology of the printed lines. Accordingly, single-factor experiments are designed to validate the printing of flexible circuits on both planar and curved substrates. Laser micro-sintering is utilized to improve the conductivity of the printed lines and ultimately fabricate flexible strain sensors. Under the sheath gas flow rate of 400 sccm, carrier gas flow rate of 100 sccm, working distance of 3 mm, nozzle diameter of 500 μm, and printing speed of 10 mm/s, the optimal morphology of the printed lines is achieved with low linewidth characteristics. The variations in the focal ratio, working distance, nozzle diameter, and printing speed significantly affect the minimum feature line width and morphology of the printed lines.