Study on the Evolution of Physicochemical Properties of Carbon Black at Different Regeneration Stages of Diesel Particulate Filters Regenerated by Non-Thermal Plasma

Abstract

As a new type of aftertreatment technology, non-thermal plasma (NTP) can effectively decompose the particulate matter (PM) deposited in diesel particulate filters (DPFs). In this paper, a regeneration test of a DPF loaded with carbon black was carried out using an NTP injection system, and the changes of oxidative activity, elemental content, and occurrence state, microstructure and graphitization degree of carbon black were analyzed to reveal the evolution of the physicochemical properties of carbon black at different regeneration stages of the DPF regenerated by NTP. As the regeneration stage of the DPF advanced, Ti, Tmax, and Te of the carbon black at the bottom of the DPF decreased, which were higher than those at the regeneration interface. After the NTP reaction, the proportion of C element decreased to less than 80%, while the proportion of O element increased to more than 20%; C-O was converted to C=O and the relative content of C=O increased. The average microcrystalline length and average spacing decreased, while the average microcrystalline curvature increased. The ID1/IG (relative peak intensities) of carbon black samples decreased from 3.31 to 3.10, and the R3 (relative peak intensities, R3 = ID3/(IG + ID2 + ID3)) increased from 0.41 to 0.58. The content of carbon clusters had a great influence on the disorder of the microcrystalline structure, so the graphitization degree of carbon black decreased and the oxidation activity increased.