Wide-Range Humidity–Temperature Hybrid Flexible Sensor Based on Strontium Titanate and Poly 3,4 Ethylenedioxythiophene Polystyrene Sulfonate for Wearable 3D-Printed Mask Applications

Abstract

In this paper, we report a fast, linear wide-range hybrid flexible sensor based on a novel composite of strontium titanate (SrTiO3) and poly 3,4 ethylenedioxythiophene polystyrene sulfonate (PEDOT: PSS) as a sensing layer. Inter-digitate electrodes (IDEs) were printed for humidity monitoring (finger: 250 µm; spacing: 140 µm; length: 8 mm) whilst a meander-based pattern was printed for the temperature measurement (meander thickness: 180 µm; spacing: 400 µm) on each side of the PET substrate using silver ink. Moreover, active layers with different concentration ratios were coated on the electrodes using a spray coating technique. The as-developed sensor showed an excellent performance, with a humidity measurement range of (10–90% RH) and temperature measurement range of (25–90 °C) with a fast response (humidity: 5 s; temperature: 4.2 s) and recovery time (humidity: 8 s; temperature: 4.4 s). The reliability of the sensor during mechanical bending of up to 5.5 mm was validated with a reliable performance. The sensor was also used in real-world applications to measure human respiration. For this, a suggested sensor-based autonomous wireless node was included in a 3D-printed mask. The manufactured sensor was an excellent contender for wearable and environmental applications because of its exceptional performance, which allowed for the simultaneous measurement of both quantities by a single sensing device.