Performance Evaluation of Grid-Connected DFIG-Based WECS with Battery Energy Storage System under Wind Alterations Using FOPID Controller for RSC

Abstract

In the present energy scenario, wind energy is the fastest-growing renewable energy resource on the globe. However, wind-energy-based generation systems are also associated with increasing demands for power quality and active power control in the power network. With the advancements in power-electronics-based technology and its use in non-conventional energy conversion systems, it has witnessed tremendous growth in wind energy conversion systems (WECSs). At the same time, integrating wind farms into the grid system also results in many power quality issues in the power system that involve these renewable energy sources feeding power networks. This paper reports the effectiveness of grid-connected doubly fed induction generator (DFIG)-based WECS with a battery energy storage system (BESS) under variable wind conditions. In this study, a rotor side converter (RSC) is controlled to achieve the optimal torque for a given maximal wind power. The control scheme is simulated using MATLAB for a 2 MW-rated DFIG used in a WECS. Additionally, in this paper, a new fraction order proportional integral derivative (FOPID) controller is introduced into the system’s RSC, and its performance is also observed. The BESS technique is used with a DC link to improve the overall performance of the DFIG-based WECS under different wind conditions. To control the BESS, a proportional integral (PI) controller is introduced to increase the charging and discharging rates. Two models are developed in MATLAB/Simulink: one model is a basic model, and other model is equipped with a BESS and a PI controller in the BESS. The results validate the effectiveness of the proposed PI-controller-equipped BESS at improving the overall performance of the WECS system under study.