Abstract
Establishing a suitable classification and evaluation scheme is crucial for sweet spot prediction and efficient development of shale oil in the Chang 71-2 sub-member of the Longdong area. In this paper, a series of experiments, such as casting thin sections (CTS), scanning electron microscopy (SEM), low-temperature nitrogen adsorption (LTNA), high-pressure mercury intrusion porosimetry (HMIP), and nuclear magnetic resonance (NMR), were integrated to classify the pore throats and shale oil reservoirs in the study area. Moreover, the pore structure characteristics of different types of reservoirs and their contributions to productivity were revealed. The results show that the pore-throat system can be divided into four parts: large pore throats (>0.2 μm), medium pore throats (0.08~0.2 μm), small pore throats (0.03~0.08 μm), and micropore throats (<0.03 μm). Based on the development degree of various pore throats, the reservoir is divided into four types: type I (Φ ≥ 10%, K > 0.1 mD), type II (Φ ≥ 8%, 0.05 mD < K < 0.1 mD), type III (Φ ≥ 5%, 0.02 mD < K < 0.05 mD) and type IV (Φ < 5% or K < 0.02 mD). From type I to IV reservoirs, the proportion of dissolved pores and intergranular pores gradually decreases, and the proportion of intercrystalline pores increases. The proportion of large pore throats gradually decreases, and the proportions of medium pore throats and small pore throats increase initially and then decrease, while the proportion of micropore throats increases successively. The NMR pore size distribution changes from the right peak to the left peak. The developed section of the type I reservoir corresponds to the oil layer, and the developed section of the type I and II reservoirs corresponds to the poor oil layer. In contrast, the developed section of the type III and IV reservoirs corresponds to the dry layer. The daily production from single wells is primarily attributable to type I and II reservoirs.
Funder
China Petroleum Science and Technology Innovation Fund Project “Research on Occurrence Characteristics and Recoverability of Sandy Conglomerate Tight Oil”
Subject
Energy (miscellaneous),Energy Engineering and Power Technology,Renewable Energy, Sustainability and the Environment,Electrical and Electronic Engineering,Control and Optimization,Engineering (miscellaneous),Building and Construction