Abstract
The state-of-the-art CMOS technology has started to adopt three-dimensional (3D) integration approaches, enabling continuous chip density increment and performance improvement, while alleviating difficulties encountered in traditional planar scaling. This new device architecture, in addition to the efforts required for extracting the best material properties, imposes a challenge of reducing the thermal budget of processes to be applied everywhere in CMOS devices, so that conventional processes must be replaced without any compromise to device performance. Ultra-violet laser annealing (UV-LA) is then of prime importance to address such a requirement. First, the strongly limited absorption of UV light into materials allows surface-localized heat source generation. Second, the process timescale typically ranging from nanoseconds (ns) to microseconds (μs) efficiently restricts the heat diffusion in the vertical direction. In a given 3D stack, these specific features allow the actual process temperature to be elevated in the top-tier layer without introducing any drawback in the bottom-tier one. In addition, short-timescale UV-LA may have some advantages in materials engineering, enabling the nonequilibrium control of certain phenomenon such as crystallization, dopant activation, and diffusion. This paper reviews recent progress reported about the application of short-timescale UV-LA to different stages of CMOS integration, highlighting its potential of being a key enabler for next generation 3D-integrated CMOS devices.
Subject
Electrical and Electronic Engineering,Computer Networks and Communications,Hardware and Architecture,Signal Processing,Control and Systems Engineering
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献
1. Microsecond UV laser annealing annihilating Ru grains smaller than electron mean free path;2023 IEEE International Interconnect Technology Conference (IITC) and IEEE Materials for Advanced Metallization Conference (MAM)(IITC/MAM);2023-05