Affiliation:
1. Research and Development Center for Solid State Lighting Institute of Semiconductors Chinese Academy of Sciences Beijing 100083 China
2. Center of Materials Science and Optoelectronics Engineering University of Chinese Academy of Sciences Beijing 101408 China
Abstract
High crystalline quality and flat a‐plane aluminum gallium nitride (AlGaN) films are obtained on Si‐doped AlN templates with a moderate silane (SiH4) flow rate by metal‐organic chemical vapor deposition (MOCVD). The effects of the SiH4 flow rate on the surface morphology, crystalline quality, stress state, and optical property of a‐plane AlN templates and AlGaN films are comprehensively investigated. As the SiH4 flow rate increases from 0 to 7.0 nmol min−1, the full width at half maximum of X‐ray rocking curve values along [0001]/[1–100] directions for the AlGaN films are monotonically reduced to 1124/1143 arcsec. Meanwhile, the surface root mean square roughness value is decreased to 0.88 nm. These achievements are attributed to the suppression of the anisotropy degrees and in‐plane stress of AlN templates. In addition, an excess SiH4 flow rate leads to deteriorated surface morphologies and increased basal plane stacking fault (BPSF) densities for both AlN and AlGaN films. This work suggests that doping AlN layers with an appropriate SiH4 flow rate is a promising route to obtain high‐quality a‐plane AlGaN films for efficient nonpolar deep ultraviolet (DUV) devices.
Funder
National Natural Science Foundation of China
Beijing Nova Program
Youth Innovation Promotion Association of the Chinese Academy of Sciences