Investigation of The Effect of Cr2O3 Particles on Al-Si Matrix Composites Produced by Powder Metallurgy-Reference-Cited by-同舟云学术

Investigation of The Effect of Cr2O3 Particles on Al-Si Matrix Composites Produced by Powder Metallurgy

Published:2023-06-27 Issue:2 Volume:12 Page:387-395
ISSN:2147-3129
Container-title:Bitlis Eren Üniversitesi Fen Bilimleri Dergisi
language:
Short-container-title:

Author:

ÖZEL Serkan¹^ORCID,ASLAN Kübra²^ORCID

Affiliation:

1. BİTLİS EREN ÜNİVERSİTESİ

2. BITLIS EREN UNIVERSITY

Abstract

Metal matrix composite materials can be produced by powder metallurgy method. In this study, composite material with Al+12wt%Si matrix was produced by powder metallurgy (P/M) method. Al+12wt%Si powder was mixed by adding 5wt%, 10wt% and 15wt% Cr2O3 powder. Al+12wt%Si + Cr2O3 mixture powders were pressed unidirectional with 500MPa pressure in a cylindrical mold and sintered at 500 ºC. After sintering, optical microstructure, Scanning Electron Microscope (SEM), Energy Dispersive Spectrometer (EDS) and microhardness analyzes of the samples were made. When the results were examined, it was observed that a porous structure was formed in all of the samples. Moreover, the lowest amount of microhardness was measured in the sample added %15wt Cr2O3 powder sintered at 500 ºC.

Publisher

Bitlis Eren Universitesi Fen Bilimleri Dergisi

Subject

Earth-Surface Processes

Reference17 articles.

1. [1]M. Yadav, L. A. Kumaraswamidhas, and S. K. Singh, “Investigation of solid particle erosion behavior of Al-Al2O3 and Al-ZrO2 metal matrix composites fabricated through powder metallurgy technique,” Tribol. Int., vol. 172, no. 107636, p. 107636, 2022.

2. [2] K. C. Nayak, P. R. Deshmukh, A. K. Pandey, P. Vemula, and P. P. Date, “Microstructural, physical and mechanical characterization of grinding sludge based aluminium metal matrix composite,” Mater. Sci. Eng. A Struct. Mater., vol. 773, no. 138895, p. 138895, 2020.

3. [3] I. Bahaj, M. Kaddami, A. Dahrouch, N. Labjar, and M. Essahli, “The effect of particle content and sintering time on the properties of Al-Al9Co2-Al13Co4 composites, made by powder metallurgy,” Mater. Today, vol. 62, pp. A1–A7, 2022.

4. [4] M. Ardestani and F. Karpasand, “Chemical synthesis and densification of a novel Ag/Cr2O3-AgCrO2 nanocomposite powder,” Sci. Eng. Compos. Mater., vol. 25, no. 4, pp. 739–743, 2018.

5. [5] O. Adıyaman, "Investigation of Mechanical Properties of Composite Al6061/Ni-Al2O3 Produced by Stir Casting Process", European Journal of Technique (EJT), vol. 12, no. 1, pp. 30-35, 2022.