Kinetic models of multiple-stage martensite transformation and subsequent isothermal bainite formation excluding ε-carbide precipitation in intercritical quenching and partitioning steels-Reference-Cited by-同舟云学术

Kinetic models of multiple-stage martensite transformation and subsequent isothermal bainite formation excluding ε-carbide precipitation in intercritical quenching and partitioning steels

Published:2019-12 Issue: Volume:183 Page:108183
ISSN:0264-1275
Container-title:Materials & Design
language:en
Short-container-title:Materials & Design

Author:

Peng Fei,Xu Yunbo,Han Dingting,Gu Xingli

Funder

National Natural Science Foundation of China

National Key Research and Development Program of China

Publisher

Elsevier BV

Subject

Mechanical Engineering,Mechanics of Materials,General Materials Science

Reference43 articles.

1. Carbon partitioning into austenite after martensite transformation;Speer;Acta Mater.,2003

2. Microstructural evolution of a low-carbon steel during application of quenching and partitioning heat treatments after partial austenitization;Santofimia;Metall. Mater. Trans. A,2009

3. Microstructure characterization and mechanical behavior analysis in a high strength steel with different proportions of constituent phases;Peng;Mater. Sci. Eng. A,2018

4. Partitioning of carbon from supersaturated plates of ferrite, with application to steel processing and fundamentals of the bainite transformation;Speer;Curr. Opinion Solid State Mater. Sci.,2004

5. Effect of retained austenite stabilized via quench and partitioning on the strain hardening of martensitic steels;De Moor;Metall. Mater. Trans. A,2008

Cited by 13 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Enhancing Mechanical Properties of Carbon–Silicon Steel through Two‐Stage Quenching and Partitioning with Bainitic Transformation: Ultimate Tensile Strength of 1875 MPa and Total Elongation of 8.03%;steel research international;2024-04-03

2. Influence of Q&P-Parameters and Al-Content on the Microstructural Evolution of Lean-Medium-Mn-Steels;HTM Journal of Heat Treatment and Materials;2024-04-01

3. Investigating the role of the austenitizing temperature and cooling rate on the martensitic transformation kinetics in a SAE 9254 spring steel;Journal of Alloys and Metallurgical Systems;2024-03

4. Effect of austenitizing temperature on isothermal quenching microstructure and mechanical properties of 52100 bearing steel;Materials Science and Engineering: A;2024-02

5. Enhancing the yield strength of intercritically annealed Q&P steel via bainite-based quenching and partitioning treatment;Journal of Materials Research and Technology;2023-11