1. Tarsha Kurdi KE. Contraintes résiduelles de cuisson dans les stratifiés composites à finalité aéronautique: intégration du procédé de mise en œuvre et étude de leur influence sur les caractéristiques mécanique. Ph.D. Thesis, University Paul Sabatier of Toulouse, France; 2003 [in French].
2. Optimisation of the co-curing of two different composites with the aim of minimising residual curing stress levels;Olivier;Compos Sci Technol,1998
3. Assessment of cure residual strains through the thickness of carbon–epoxy laminates using FBGs: part II, technological specimens;Mulle;Composites Part A,2008
4. Mulle M, Collombet F, Périé JN, Olivier P, Grunevald Y-H. Instrumented technological specimen (ITS): curing process and mechanical characterisation using embedded fiber gratings. In: Proceedings of ECCM11 (11th European conference on composite materials), 31 May–3 June 2004, Rhodes, Greece, paper #C137 [CDROM].
5. Thermal expansion of carbon–epoxy laminates measured with embedded FBGS – comparison with other experimental techniques and numerical simulation;Mulle;Composites Part A,2007