Evaluation of the thermomechanical Shape memory polymers in equi-biaxial condition by hydraulic bulge test

Abstract

Abstract Shape Memory Polymers (SMPs) are materials capable of changing their primary shape to a secondary shape thanks to the so called Shape Memory Effect (SME) phenomenon. The shape-shifting is achieved through the action of an external stimulus, such as heat, electricity, pH, etc. In this paper, experiments on a thermally actuated thin film of a Shape Memory Thermoplastic Polyurethane (SMPU) were performed to calibrate the parameters of a constitutive model which accounts the rubbery/glassy phase transition mechanism behind the shape memory behaviour. In particular, thermomechanical uniaxial tensile tests have been carried out in order to the Young modulus and Poisson’s ratio above/under glass transition temperature and the fixity/recovery ratio. Additionally, the hydraulic bulge test (HBT) in a thermally controlled loading/unloading cycle was used to study the behaviour of the SME at large strains under equi-biaxial stress state. The corresponding outcomes were, therefore, employed to validate the results of the initial calibration by means of a Finite Element (FE) simulation of the HBT.