A model construction and measurement method for tooth surface deviation of spiral bevel gear based on a one-dimensional probe

Abstract

Abstract The accurate measurement of tooth surface deviation is an important prerequisite for the quality monitoring of high-precision spiral bevel gears. A measurement method for tooth surface deviation of spiral bevel gears is proposed based on a one-dimensional probe, which can accurately measure and evaluate tooth flank. According to the forming principle of the spiral bevel gear tooth surface, the theoretical surface is constructed as the measurement reference flank. A series of measures and methods are adopted to ensure the accuracy and correctness of one-dimensional probe measurement. These effective methods include the construction of a precise positioning model of the gear blank and its surface, the measurement planning of reduction dimension which the gear needs to rotate once the normal angle after each point is measured, and the compensation for the increasing dimension of the one-dimensional probe. In addition, minimization of the normal deviation of the tooth flank is achieved by using the optimum matching technique of the theoretical and the actual surfaces. The deviation degree of the actual surface relative to the theoretical surface can be accurately calculated and evaluated by establishing a deviation model, which ensures the correctness of the evaluation result of the deviation. Finally, the test of tooth surface deviation is carried out on a JD45+ gear measuring center (GMC) using a one-dimensional probe and a Gleason 650GMS GMC using a three-dimensional probe. The measurement results show that the evaluation results of the one-dimensional probe are in good agreement with those of the three-dimensional probe. The proposed theory and method not only expand the measurement range of the GMC using a one-dimensional probe, but also have certain reference significance for the precision measurement of other complex surfaces.