Author:
Albu‐Schäffer A.,Haddadin S.,Ott Ch.,Stemmer A.,Wimböck T.,Hirzinger G.
Abstract
PurposeThe paper seeks to present a new generation of torque‐controlled light‐weight robots (LWR) developed at the Institute of Robotics and Mechatronics of the German Aerospace Center.Design/methodology/approachAn integrated mechatronic design approach for LWR is presented. Owing to the partially unknown properties of the environment, robustness of planning and control with respect to environmental variations is crucial. Robustness is achieved in this context through sensor redundancy and passivity‐based control. In the DLR root concept, joint torque sensing plays a central role.FindingsIn order to act in unstructured environments and interact with humans, the robots have design features and control/software functionalities which distinguish them from classical robots, such as: load‐to‐weight ratio of 1:1, torque sensing in the joints, active vibration damping, sensitive collision detection, compliant control on joint and Cartesian level.Practical implicationsThe DLR robots are excellent research platforms for experimentation of advanced robotics algorithms. Space and medical robotics are further areas for which these robots were designed and hopefully will be applied within the next years. Potential industrial application fields are the fast automatic assembly as well as manufacturing activities done in cooperation with humans (industrial robot assistant). The described functionalities are of course highly relevant also for the potentially huge market of service robotics. The LWR technology was transferred to KUKA Roboter GmbH, which will bring the first arms on the market in the near future.Originality/valueThis paper introduces a new type of LWR with torque sensing in each joint and describes a consistent approach for using these sensors for manipulation in human environments. To the best of one's knowledge, the first systematic experimental evaluation of possible injuries during robot‐human crashes using standardized testing facilities is presented.
Subject
Industrial and Manufacturing Engineering,Computer Science Applications,Control and Systems Engineering
Reference15 articles.
1. Albu‐Schäffer, A., Ott, Ch. and Hirzinger, G. (2004), “A passivity based Cartesian impedance controller for flexible joint robots – Part II: full state feedback, impedance design and experiments”, paper presented at IEEE International Conference on Robotics and Automation, pp. 2666‐73.
2. Albu‐Schäffer, A., Ott, Ch. and Hirzinger, G. (2007), “A unified passivity based control framework for position, torque and impedance control of flexible joint robots”, International Journal of Robotics Research, Vol. 26 No. 1, pp. 23‐39.
3. Bicchi, A. and Tonietti, G. (2004), “Fast and soft arm tactics: dealing with the safety‐performance trade‐off in robot arms design and control”, IEEE Robotics and Automation Magazine, Vol. 11, pp. 22‐33.
4. Butterfaß, J., Grebenstein, M., Liu, H. and Hirzinger, G. (2001), “DLR‐Hand II: next generation of a dextrous robot hand”, paper presented at IEEE International Conference on Robotics and Automation, pp. 109‐14.
5. De Luca, A., Albu‐Schäffer, A., Haddadin, S. and Hirzinger, G. (2006), “Collision detection and safe reaction with the DLR‐III lightweight manipulator arm”, paper presented at IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 1623‐30.
Cited by
357 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献