Analyses of peg‐hole jamming in automatic assembly machines
Author:
Usubamatov Ryspek,Leong K.W.
Abstract
PurposeThe purpose of this paper is to investigate theoretically the process of jamming in the peg‐hole type parts and to derive a mathematical model of jamming.Design/methodology/approachThe mathematical model of the jamming of the peg‐hole type parts in assembly process was performed and its boundary conditions, which lead to jamming, defined.FindingsThe equation of the critical angles of declination for the peg, which leads to the peg‐hole jam, was derived. The boundary condition of the angles of declination and the depth of the peg insertion into the hole were defined.Research limitations/implicationsA mathematical model is developed for rigid parts with a hole and for the peg clamped in the rigid assembly mechanisms. The research has not considered flexible deformations and stiffness of the assembly mechanisms, which result in the peg's declination in the assembly process.Practical implicationsThe results are represented in the form of the peg's critical angles of declination and critical depth of insertion into the hole, which leads to jamming of the peg‐hole type parts to be assembled. On the basis of the obtained results, it is possible to formulate the tolerances of the declination angles for the assembly mechanisms, which clamp the peg‐type parts.Originality/valueThe proposed method calculating the critical angles of the peg's declination and critical depth of the peg's insertion into the hole for assembly of the peg‐hole type parts, enables one to increase the reliability of the assembly process in the manufacturing industry.
Subject
Industrial and Manufacturing Engineering,Control and Systems Engineering
Reference17 articles.
1. Dietrich, F., Buchholz, D., Wobbe, F., Sowinski, F., Raatz, A., Schumacher, W. and Wahl, F. (2010), “On contact models for assembly tasks: experimental investigation beyond the peg‐in‐hole problem on the example of force‐torque maps”, IEEE Int. Conf. on Intelligent Robots and Systems, Taipei, Taiwan, pp. 2313‐18. 2. Giblin, D.J., Liu, Y. and Kazerounian, K. (2008), “Target tracking robotic manipulation theories applied to force/position control in peg‐in‐hole assembly tasks”, International Journal of Robotics & Automation, Vol. 23 No. 1. 3. Boothroyd, G. (2008), Assembly Automation and Product Design, 2nd ed., Taylor & Francis, Boca Raton, FL, p. 512. 4. Bruzzone, L.E., Molfino, R.M. and Zoppi, M. (2002), “Modeling and control of peg‐hole assembly performed by a translational robot”, Proceedings of the International Conference Modeling Identification and Control, Austria, pp. 512‐7. 5. Crowson, R. (2006), Assembly Processes: Finishing, Packaging, and Automation, 2nd ed., Taylor & Francis, Boca Raton, FL, p. 168.
Cited by
29 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献
|
|