Design of a compliant device for peg-hole separation in robotic disassembly

Abstract

AbstractDisassembly is the first step in the remanufacturing of a product. This paper presents the design of a robot end-of-arm tool for removing a peg from a hole, a common operation in the disassembly of mechanical products. The device is a compliant structure that enables the peg to be pulled out of a closely fitting hole without jamming or wedging. The device is reminiscent of the Remote Centre Compliance (RCC) mechanism used by assembly robots to insert cylindrical pegs into cylindrical holes with small clearances. However, whereas the RCC mechanism has primarily to withstand compressive forces, the proposed compliant device must resist tensile forces because of the nature of disassembly operations. The paper details a finite-element modelling study of peg removal with and without using the compliant structure. The results obtained show that the structure markedly reduces the stresses at the points of contact between the peg and the hole and, consequently, the risk of damage to the components being disassembled.