Experimental studies on the tribological behaviour of engine oil (SAE15W40) with the addition of CuO nanoparticles
Author:
V. Thottackkad Manu,Rajendrakumar P.K.,Prabhakaran Nair K.
Abstract
Purpose
– This manuscript aims to deal with the tribological property variations of engine oil (SAE15W40) by the addition of copper oxide (CuO) nanoparticles on weight percentage basis.
Design/methodology/approach
– Experimental studies on the influence of CuO nanoparticles utilised as an additive in lubricating oil (SAE15W40) under boundary lubrication conditions have been carried out using a pin-on-disc machine in accordance with ASTM G-99 standard. The variation of viscosity, coefficient of friction, wear and settling of nanoparticles has been studied as a function of particle concentration in the lubricant.
Findings
– Results show that the frictional force and specific wear rate decrease with an increase in concentration of nanoparticles comes to a minimum at a specific concentration and then increases, showing the presence of an optimum concentration. With the increase in concentration of nanoparticles, the kinematic and dynamic viscosities, and the flash and fire points are found to increase.
Originality/value
– The use of CuO nanoparticles as additives to a moderate level is a very efficient means of improving the tribological properties of lubricating oils.
Subject
Surfaces, Coatings and Films,General Energy,Mechanical Engineering
Reference20 articles.
1. Chinnas-Castillo, F.
and
Spikes, H.A.
(2003), “Mechanism of action of colloidal solid dispersions”, Journal of Tribological: Transactions ASME, Vol. 125, pp. 552-557. 2. Hernández Battez, A.
,
González, R.
,
Felgueroso, D.
,
Fernández, J.E.
,
Ma. del Rocío Fernández
,
García, M.A.
and
Peñuelas, I.
(2007), “Wear prevention behaviour of nanoparticle suspension under extreme pressure conditions”, Wear, Vol. 263, pp. 1568-1574. 3. Hernández Battez, A.
,
González, R.
,
Viesca, J.L.
,
Fernández, J.E.
,
Díaz Fernández, J.M.
,
Machado, A.
,
Chou, R.
and
Riba, J.
(2008), “CuO, ZrO2 and ZnO nanoparticles as antiwear additive in oil lubricants”, Wear, Vol. 265, pp. 422-428. 4. Hsu, S.M.
(2004), “Nano-lubrication: concept and design”, Tribology International, Vol. 37, pp. 537-545. 5. Lee, C.G.
,
Hwang, Y.J.
,
Choi, Y.M.
and
Lee, J.K.
(2009), “A study on the tribological characteristics of graphite nano lubricants”, International Journal of Precision Engineering and Manufacturing, Vol. 10 No. 1, pp. 85-90.
Cited by
33 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献
|
|