Abstract
Highlights:
A new methodology is presented to develop geometrical analysis of burial structures based on 3D models.
The methodology has been applied to three contiguous burial structures (hypogea), allowing the researchers to analyse some constructive aspects such as dimensions, proportions, orientations, flatness and inclinations.
Results have demonstrated the advanced skills achieved by ancient Egyptians in construction techniques.
Abstract:
This study describes the methodology developed and the main results obtained when analysing the geometrical behavior of three adjacent burial structures located in southern Egypt. The rock-cut tombs are composed of complex geometries such as halls, corridors, chambers and vertical shafts. Among other determining aspects, this complexity greatly conditioned the data acquisition and processing work. In this context, the main objective of this study was to develop a new methodology for obtaining geomatic products that support a complete geometrical analysis of the tombs. The researchers have used photogrammetric and laser scanning surveys to obtain accurate 3D models on a common reference system. The procedure used included obtaining several secondary products, such as several geometries (planes and cylinders) fitted from point clouds or plans and sections obtained from the 3D models. The geometric analysis has included several aspects: dimensions, proportions, orientations, wall flatness, inclinations, etc., and it is based on these products. The results obtained suggest and confirm several hypotheses about the constructive aspects of these hypogea based on a large amount of data, including the determination of a proportional canon used by the ancient Egyptians to plan and perform the excavation works of each funerary structure. The application of this methodology has demonstrated that this type of analysis is viable to unveil some important aspects of these structures and the constructive procedures carried out almost four millennia ago.
Publisher
Universitat Politecnica de Valencia
Subject
Computer Science Applications,Archeology,Archeology,Conservation
Reference60 articles.
1. Ahmon, J. (2004). The application of short-range 3D laser scanning for archaeological replica production: the Egyptian tomb of Seti I. The Photogrammetric Record, 19(106), 111-127. https://doi.org/10.1111/j.1477-9730.2004.00034.x
2. Alshawabkeh, Y., & Haala, N. (2004). Integration of digital photogrammetry and laser scanning for heritage documentation. The International Archives of Photogrammetry and Remote Sensing, 35, B5.
3. Angelini, A., Vittozzi, G. C., & Baldi, M., (2016). The high official Harkhuf and the inscriptions of his tomb in Aswan (Egypt). An integrated methodological approach. Acta IMEKO, 5(2), 71-79. https://doi.org/10.21014/acta_imeko.v5i2.349
4. Barazzetti, L., Previtali, M., & Roncoroni, F. (2017a). 3D Modelling with the Samsung Gear 360. The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, XLII-2-W3, 85-90. https://doi.org/10.5194/isprs-archives-XLII-2-W3-85-2017
5. Barazzetti, L., Previtali, M., & Roncoroni, F. (2017b). Fisheye lenses for 3D modeling: evaluations and considerations. The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, XLII-2/W3, 79-84. https://doi.org/10.5194/isprs-archives-XLII-2-W3-79-2017
Cited by
5 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献