A Study on the Influence of Plasma Nitriding Technology Parameters on the Working Surface Deformation of Hypoid Gears-Reference-Cited by-同舟云学术

A Study on the Influence of Plasma Nitriding Technology Parameters on the Working Surface Deformation of Hypoid Gears

Published:2022-12-15 Issue:6 Volume:12 Page:9760-9765
ISSN:1792-8036
Container-title:Engineering, Technology & Applied Science Research
language:
Short-container-title:Eng. Technol. Appl. Sci. Res.

Author:

Le H. K.

Abstract

This paper presents the results of the research on the influence of plasma nitriding technology parameters on the working surface deformation of hypoid gears. Blue light technology with non-contact measuring devices is used to determine the working surface deformation of hypoid gears after plasma nitriding. The study has determined a regression equation showing the influence of plasma nitriding technology parameters on the deformation of the working surface of the hypoid gear. The minimum deformation optimization value at the planning area is 0.0071746 at permeation temperature TL=4.89oC, permeation time h=510h, and gas flow 1 G1=6.02L/h.

Publisher

Engineering, Technology & Applied Science Research

Subject

General Medicine

Reference17 articles.

1. M. Kolivand, Development of Tooth Contact and Mechanical Efficiency Models for Face-milled and Face-hobbed Hypoid and Spiral Bevel Gears. Columbus, OH, USA: Ohio State University, 2009.

2. T. H. Le, V. B. Pham, and T. D. Hoang, "Surface Finish Comparison of Dry and Coolant Fluid High-Speed Milling of JIS SDK61 Mould Steel," Engineering, Technology & Applied Science Research, vol. 12, no. 1, pp. 8023–8028, Feb. 2022.

3. D. Pye, Practical Nitriding and Ferritic Nitrocarburizing. ASM International, 2003.

4. ISO/TR 22849:2011(en), Design recommendations for bevel gears. ISO, 2011.

5. D. Y. Chung, H. J. Kim, and H. N. Kim, "A Study on the Erosion Characteristics of the Micropulsed Plasma Nitrided Barrel of a Rifle," in 19th International Symposium of Ballistics, Interlaken, Switzerland, May 2001.

Cited by 5 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Evaluation Strength of Materials of the Compressor Wheel and Engine Power in the Turbocharger;Engineering, Technology & Applied Science Research;2024-08-02

2. Effect of Plasma Nitriding Technology Parameters on Working Surface Quality Gears made of SAE 5120 Steel;Journal of Vibration Engineering & Technologies;2024-05-31

3. The Influence of Plasma Nitriding Technology Parameters on the Hardness of 18XГT Steel Parts;Engineering, Technology & Applied Science Research;2024-04-02

4. Optimization of Technological Parameters when Plasma Nitriding the Gear Working Surface;Engineering, Technology & Applied Science Research;2023-06-02

5. Prediction of the Adhesion Strength of Coating in Plasma Spray Deposition;Engineering, Technology & Applied Science Research;2023-04-02