Additive manufacturing for the automotive industry: on the life-cycle environmental implications of material substitution and lightweighting through re-design

Abstract

AbstractThe automotive sector has recently been taking measures to reduce fuel consumption and greenhouse gas emissions for the mobility of ground vehicles. Light-weighting, via material substitution, and the re-designing of components or even a combination of the two, have been identified as a crucial solution. Additive manufacturing (AM) can be used to technologically complement or even replace conventional manufacturing in several industrial fields. The enabling of complexity-for-free (re) designs is inherent in additive manufacturing. It is expected that certain benefits can be achieved from the adoption of re-design techniques, via AM, that rely on topological optimisation, e.g., a reduced use of resources in both the material production and use phases. However, the consequent higher specific energy consumption and the higher embodied impact of feedstock materials could result in unsustainable environmental costs. This paper investigates the case of the light-weighting of an automobile component to quantify the outcomes of the systematic integration of re-designing and material substitution. A bracket, originally cast in iron, has been manufactured by means of a powder bed-based AM technique in AlSi10Mg through an optimized topology. Both manufacturing routes have been evaluated through a comparative Life Cycle Assessment (LCA) within cradle-to-grave boundaries. A 69%-lightweighting has been achieved, and the carbon dioxide emissions and energy demands of both scenarios have been compared. Besides the use-phase-related savings in terms of both energy and carbon footprint due to the lightweighting, the results highlight the environmental trade-offs and prompt the consideration of such a manufacturing process as an integral part of sustainable product development.