The Role of Lengthscale in the Creep of Sn-3Ag-0.5Cu Solder Microstructures

Abstract

AbstractCreep of directionally solidified Sn-3Ag-0.5Cu wt.% (SAC305) samples with near-<110> orientation along the loading direction and different microstructural lengthscale is investigated under constant load tensile testing and at a range of temperatures. The creep performance improves by refining the microstructure, i.e. the decrease in secondary dendrite arm spacing (λ2), eutectic intermetallic spacing (λe) and intermetallic compound (IMC) size, indicating a longer creep lifetime, lower creep strain rate, change in activation energy (Q) and increase in ductility and homogeneity in macro- and micro-structural deformation of the samples. The dominating creep mechanism is obstacle-controlled dislocation creep at room temperature and transits to lattice-associated vacancy diffusion creep at elevated temperature ($$ \frac{T}{{T_{M} }} $$ T T M  > 0.7 to 0.75). The deformation mechanisms are investigated using electron backscatter diffraction and strain heterogeneity is identified between β-Sn in dendrites and β-Sn in eutectic regions containing Ag3Sn and Cu6Sn5 particles. The size of the recrystallised grains is modulated by the dendritic and eutectic spacings; however, the recrystalised grains in the eutectic regions for coarse-scaled samples (largest λ2 and λe) is only localised next to IMCs without growth in size.