INVESTIGATION OF THE ENERGY INDICATORS FOR THE SURFACE TREATMENT OF SOIL BY A HARROW WITH A SCREW-TYPE WORKING BODY
-
Published:2023-12-31
Issue:
Volume:
Page:818-833
-
ISSN:2068-2239
-
Container-title:INMATEH Agricultural Engineering
-
language:en
-
Short-container-title:INMATEH
Author:
BULGAKOV Volodymyr1, KALETNІK Hryhorij2, TROKHANIAK Oleksandra1, LUTKOVSKA Svitlana2, KLENDII Mykola3, IVANOVS Semjons4, POPA Lucretia5, YAROPUD Vitalii2
Affiliation:
1. National University of Life and Environmental Sciences of Ukraine, Ukraine 2. Vinnytsia National Agrarian University, Ukraine 3. Separated Subdivision of National University of Life and Environmental Sciences of Ukraine, Berezhany Agrotechnical Institute, Ukraine 4. Latvia University of Life Sciences and Technologies, Latvia 5. National Institute of Research – Development for Machines and Installations Designed for Agriculture and Food Industry – INMA Bucharest / Romania
Abstract
Restoration of the soil fertility is an important task for scientists and practitioners. Based on the constructed mathematical model of the surface of a screw-type working body, rotating around a fixed horizontal axis, there are determined the work and power of penetration of the screw-type working body into the soil, loosening the soil and overcoming the soil friction. It has been established that the cutting power is proportional to the square root of deepening of the working body (а1/2), and the radius of the working body (R1/2) is directly proportional to the speed of the unit V. On the basis of a complex of experimental studies, regression dependencies were derived to determine the traction resistance when cultivating the soil with a harrow, equipped with screw-type working bodies. It has been found that the dominant impact upon the value of the traction resistance Рх is exerted by the depth of tillage h, then by the angle of attack β of the battery of the screw-type working bodies, but the least impact is made by the change in the speed of the harrow V. The difference between the calculated and the experimental values of the traction resistance ranges from 9.6...11.2%.
Publisher
INMA Bucharest-Romania
Reference19 articles.
1. Bulgakov, V., Ivanovs, S., Kuvachov, V. & Prysiazhniuk, D. (2021). Investigation of the influence of permanent traffic lane properties on rolling of bridge agricultural equipment wheels. Acta Technologica Agriculturae, 24(2), 97-102. 2. Bulgakov, V., Aboltins, A., Ivanovs, S., Beloev, H., Nadykto, V., Ihnatiev, Y. & Olt, J. (2022). Theory of movement of Machine‐Tractor unit with trailer haulm harvester machine. Applied Sciences (Switzerland), 12(8) 3. Gevko, B.M., Rogatynsky, R.M. (1989). Screw feeders of agricultural machines. Lvov. Great school. 176 p. 4. Hevko, R. B., Klendiy, M. B., Klendiy, O. M. (2016). Investigation of a transfer branch of a flexible screw conveyer. INMATEH – Agricultural Engineering, 48(1), 29–34. 5. Hevko, R. B., Rozum, R. I., Klendiy, O. M. (2016). Development of design and investigation of operation processes of loading pipes of screw conveyors. INMATEH – Agricultural Engineering, 50(3), 89-94.
|
|