Affiliation:
1. College of Engineering, Nanjing Agricultural University, Nanjing, 210031, China
Abstract
This paper proposed a structural design scheme of the hydraulic device of the electro-hydraulic controlled hitch system of a YM554A horticultural tractor with hydraulic device model, and the designed hydraulic device was simulated and tested to verify its performance. Results show that the motion of hydraulic actuator is stable with good response for tillage depth control, while the maximum lifting force of 10.62kN and the static settlement value of 13mm all meet the standard requirements. And the oil pressure changes rapidly with a large fluctuation with the plough position changed from transportation state to tillage state, but it quickly stabilizes, and as the tillage depth becomes larger, the oil pressure drops but remains basically stable with the maximum oil pressure change of 0.35MPa.
Publisher
R and D National Institute for Agricultural and Food Industry Machinery - INMA Bucharest
Subject
Industrial and Manufacturing Engineering,Mechanical Engineering,Food Science
Reference16 articles.
1. Anthonis A., Mouazen M., Saeys W., and Ramon H., (2004), An automatic depth control system for online measurement of spatial variation in soil compaction, Part3: Design of depth control system, Biosystems Engineering, Vol.89, pp.253-253.
2. Chen Z., Wu H., Zhang Y., Peng B., Gu F., Hu Z., (2018), Development of automatic depth control device for semi-feeding four-row peanut combine harvester, Transactions of the Chinese Society of Agricultural Engineering, Vol.34, issue 15, pp.10-18.
3. Chen, J.S., and Cheng W.B., (2014), Linear analysis of hydraulic control system of an electric-hydraulic proportion, Advanced Materials Research, Vol.898, pp.582-585.
4. Eltom A.E.F., Ding W., Ding Q, Tagar A., (2015), Field investigation of a trash-board, tillage depth and low speed effect on the displacement and burial of straw, CATENA, Vol.133, pp.385-393.
5. GB/T 3871.4-2006, (2006), Agricultural tractors - Test procedures - Part 4: Rear three-point linkage lifting capacity, Beijing: China Standard Press. (in Chinese) GB/T3871.4-2006. Beijing/China
Cited by
6 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献