Affiliation:
1. Aero Propulsion Research Division, Korea Aerospace Research Institute, Gwahak-Ro 169-84, Yuseong, Daejeon 34133, South Korea
Abstract
Abstract
Large eddy simulations (LESs) on the well-known 7-7-7 fan shaped cooling hole were carried out. Like using a trip strip to create turbulent boundary layer in practical experiments, trip strips with different configurations were placed upstream of the cooling hole to investigate incoming turbulent boundary layer effect on the film cooling flow behavior. Without the trip, horseshoe vortex generated by laminar boundary layer induced laterally discharging cooling flow in the lateral direction. Meanwhile, the induced cooling flow formed high film cooling effectiveness region around the film cooling hole. When the incoming boundary flow was turbulent, laterally discharged cooling flow was influenced by the turbulent boundary layer to dissipate to the main flow and resultant high effectiveness region disappeared. Depending on the trip configuration, quantitative characteristics of boundary layer such as turbulent intensity, momentum thickness, and shape factor were strongly affected. Some trip configurations resulted in fully developed turbulent boundary layer just before leading edge of the film cooling hole. In such cases, distribution of the film cooling effectiveness showed a reasonable agreement with available experimental data where the quantitative properties of the turbulent boundary layer were similar. However, when the trip was located too close to the film cooling hole, the separated and reattached flow did not develop into the stabilized turbulent boundary layer. Then strong turbulence intensity in the main flow boundary layer stimulated break down of the cooling flow vortex structure and early dissipation to the main flow. It resulted in restricted film cooling flow coverage.
Subject
Fluid Flow and Transfer Processes,General Engineering,Condensed Matter Physics,General Materials Science
Reference17 articles.
1. Large Eddy Simulation of a Film Cooling Flow Injected From an Inclined Discrete Cylindrical Hole Into a Cross flow With Zero-Pressure Gradient Turbulent Boundary Layer;Johnson,2012
2. Numerical Investigation of Film Cooling Using RANS and LES;Li;Procedia Eng.,2015
3. Large Eddy Simulations of Discrete Hole Film Cooling With Plenum Inflow Orientation Effects;Acharya;ASME J. Heat Transfer,2013
4. Nikolaos, S.
, 2016, “Large Eddy Simulation of the Film Cooling Flow System of Turbine Blades: Public Shaped Holes,” M.S. thesis, Institut Superieur de l’Aeronautique et de l’Espace, Toulouse, France. http://cerfacs.fr/wp-content/uploads/2016/09/CFD_SIMIRIOTIS_STAGE.pdf
5. CFD Simulation of the Flat Plate Film Cooling of a Shaped Hole Using LES;Sudesh,2019
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献