Heat Transfer Experiments in High Aspect Ratio Rectangular Channel With Epoxied Short Pin Fins

Abstract

In an attempt to reduce the cost of testing many configurations of short pin fins in a rectangular channel, a technique has been identified whereby the pins are epoxied to the end wall and can be easily removed to form a new configuration at the end of a test. Analytical and experimental results indicate that the temperature drop across a thin layer of epoxy (∼.005–.006 cm) (K = 22.5 W/m°C) with copper pin and endwalls was less than 1% of the heat transfer surface temperature. The technique was then used to test 4 pin fin configurations of height to diameter ratio of about unity. The heat transfer results showed excellent agreement with earlier published data, thus confirming the validity of this technique.