Affiliation:
1. Department of Mechanical Engineering (312), University of Nevada, Reno, NV 89557
Abstract
The finite element model with the implementation of a robust cyclic plasticity theory was used to simulate the elastic-plastic stresses for the partial slip (stick-slip) line rolling contact. Detailed rolling contact stresses and strains were obtained for up to 40 rolling passes. The partial slip condition greatly affects the residual stress in the rolling direction and the residual shear strain within a thin layer of material near the contact surface. The residual stress in the axial direction was not significantly influenced by the partial slip condition. An increase in friction coefficient drives the location of maximum shear strain to the contact surface. In addition, a comparison was made between the finite element results and the results obtained from an approximate method.
Subject
Surfaces, Coatings and Films,Surfaces and Interfaces,Mechanical Engineering,Mechanics of Materials
Reference42 articles.
1. Bower, A. F., and Johnson, K. L., 1991, “Plastic Flow and Shakedown of the Rail Surface in Repeated Wheel-Rail Contact,” Wear, 114, pp. 1–18.
2. Cannon, D. F., and Pradier, H., 1996, “Rail Rolling Contact Fatigue—Research by the European Rail Research Institute,” Wear, 191, pp. 1–13.
3. Jiang, Y., and Sehitoglu, H., 1996, “Rolling Contact Stress Analysis with the Application of a New Plasticity Model,” Wear, 191, pp. 35–44.
4. Merwin, J. E., and Johnson, K. L., 1963, “An Analysis of Plastic Deformation in Rolling Contact,” Proceedings, Institution of Mechanical Engineers, London, 177, pp. 676–685.
5. McDowell, D. L., and Moyar, G. J., 1987, “A More Realistic Model of Nonlinear Material Response: Application to Elastic-Plastic Rolling Contact,” Proceedings Second International Symposium Contact Mechanics and Wear of Rail/Wheel Systems, University of Waterloo Press, pp. 100–106.
Cited by
45 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献