Affiliation:
1. Dhirajlal Gandhi College of Technology
Abstract
This study examines the influence of contact factors such as bearing deformation, contact width and contact pressure on cage slide in cylindrical roller bearings. A cylindrical shaped roller bearing test setup is designed in order to determine the operating speed of bearing components under varying working circumstances. Solid and hollow roller bearings are analyzed using finite element technique, and the contact parameters are obtained. The cage slip obtained by experimental work is correlated with the contact parameters of hollow and solid shaped roller bearings. The specific load acting on solid rollers at various angular positions and the corresponding bearing deflection are obtained by FEA and the bearing run out is estimated. A new methodology is developed for deriving the contact mechanics of hollow roller to predict contact pressure and contact width from the roller deflection. The effect of hollowness on these parameters is derived and the corresponding cage slip is correlated. The effect of hollowness on bending and resultant stresses is obtained by numerical and analytical methods to correlate the stability of hollow roller bearing with the percentage of hollowness.
Publisher
Trans Tech Publications, Ltd.
Reference28 articles.
1. EXPERIMENTAL INVESTIGATION OF TRIBOLOGICAL CHARACTERISTICS ON AA7068–ZrB2 IN-SITU AMCs;NALLUSAMY;Surface Review and Letters,2022
2. Experimental assessment on machinability performance of CNT and DLC coated HSS tools for hard turning;Chenrayan;Diamond and Related Materials
3. S. Sridhar, S.Nandhakumar, M. Nallusamy and R.Maguteeswaran, Microstructural analysis and experimental investigation of mechanical properties of epoxy based hybrid composite reinforced with flax, sisal and luffa fibre, Journal of ceramic processing research, 23 (2022) 498-502.
4. M. Chandru, V. Selladurai and C. Venkatesh, Multiobjective performance investigation of CNT coated HSS tool under the response surface methodology platform, Archives of Metallurgy and Materials, 66 (2021) 627-635.
5. Machinability Performance Investigation of TiAlN-, DLC-, and CNT-Coated Tools during Turning of Difficult-to-Cut Materials;Chenrayan;Journal of Nanomaterials