Kinematics-Based Five-Axis Trochoidal Milling Process Planning for Deep and Curved Three-Dimensional Slots

Abstract

Abstract Trochoidal (TR) milling is a popular means for slotting operation. Attributing to its unique circular-shaped path pattern, TR milling avoids the full tool–workpiece engagement, which helps reduce the cutting heat accumulation and hence slow down the tool wear. While traditionally TR milling is only used for machining 2.5D cavities, it has now been extended to machining genuine 3D curved cavities under the realm of five-axis machining. However, since for a typical five-axis machine tool the rotary axes have a much larger moment of inertia than the three linear axes, to reduce both the total machining time and the consumed electric energy (for driving the machine tool), it is desirable to minimize the use of the two rotary axes (particularly the one with the larger moment of inertia) when planning a TR tool path for a given 3D cavity. Nevertheless, due to the newness of five-axis TR machining, there has no published reports on this subject. In this paper, we present a five-axis TR tool path planning algorithm for machining an arbitrary 3D curved cavity, which will consider the kinematical characteristics of the five-axis machine tool and try to minimize the use of the rotary axis with the largest moment of inertia, while tending to all the required constraints such as the threshold on the cutting force. Both computer simulation and physical cutting experiments of the proposed method have been conducted, and the results give a preliminary confirmation on the feasibility and advantages of the proposed method.